The function of the roofing system is to drain rainwater through gutters put in place to make sure that the water from rooftops does not damage the foundation and the basement. Gutters and downspouts are fixed along the edges to serve this purpose. When the gutter system is clogged or damaged, water will not drain away and can lead to paddling leaks and structural damage. Gutters are to be cleaned and inspected at least twice a year.
Besides, you should also trim or cut down nearby trees for they can potentially clog the gutters. You have to be extra careful when using a ladder while trimming the trees. Make sure that the ladder is firmly positioned on an even ground to avoid falling off the ladder.
Begin the inspection by checking for loose gutters and downspouts. Ensure that all the gutter joints are firmly fixed. You may also need to check the spikes where you have attached your gutters to make sure that they are strong. Besides, you can check the downspouts for materials that can clog them and eliminate the dirt if any.
Checking for small animals that might reside on your gutters is also a great idea. Some creatures such as squirrels and termites might destroy your gutters. If you find such animals, you may need to get rid of them together with any leaves, twigs and debris in the gutters.
You can start by scooping leaves and debris from the gutters. Put the removed materials in a bucket securely placed to the ladder or drop them onto the ground. Flush smaller debris using a hose pipe since the fine material will be moved by pressured water.
Look for cracks beneath the gutters that could lead to leakages. If the water is not moving freely unclog the downspout and it is connected to the underground pipe, remove it from the pipe. Using a strong pressured hose to loosen the debris and it it fails to remove the debris you can use a plumber’s snake to break up the clog.
Look for standing watering the gutter. If the water is moving very slowly the problem might be that the slopes inadequate. Hangers require relocation up or down to create a slight slope towards the downspout.